Microcut HBM-5T Horizontal Boring kunye Milling Centre
Iimbonakalo:
1. Ikholamu ehambayo inika i-130mm ububanzi be-ISO50 taper yokusonta
2. Umthamo omkhulu kakhulu wokusebenza kunye nentloko yeRam esisigxina.
Inkcazo:
| INTO | IYUNITHI | I-HBM-5T |
| Uhambo olunqamlezayo lwetafile ye-X | mm | 3500 (std); 4500/5500 (khetha) |
| I-Y axis headstock nkqo | mm | 2600 |
| Ikholamu ye-Z uhambo olude | mm | 1400/2000 |
| Idayamitha yeQuil) | mm | 130 |
| W axis (quill) uhambo | mm | 700 |
| Amandla e-spindle | kW | 37/45 (std) |
| Max. isantya sokusonta | rpm | 35-3000 |
| I-Spindle torque | Nm | 1942/2362 (std) |
| Uluhlu lwezixhobo zokuphotha | Inyathelo eli-2 (1:1 / 1:5.5) | |
| Ubungakanani betafile | mm | 1800 x 2200 |
| Idigri ye-Rotary table indexing | isidanga | 0.001 ° |
| Isantya sokujikeleza kwetheyibhile | rpm | 1.5 |
| Max. umthamo wokulayishwa kwetafile | kg | 15000 (std) / 20000 (ukhetha) |
| Ukutya okuKhawulezayo (X/Y/Z/W) | m/umz | 10/10/10/8 |
| Inombolo yesixhobo se-ATC | 60 | |
| Ubunzima bomatshini | kg | 49000(std); 51500/54500(khetha) |
Izincedisi eziqhelekileyo:
Iphakheji ye-Spindle kunye ne-servo motor
Itafile enkulu yokusebenza ephantsi ngokupheleleyo ene-11 T-slots
Isikrufu sebhola esezantsi esichanekileyo
Amacandelo esinyithi esinembambo kakhulu
Telescopic indlela cover
Automatic central lubrication
Inkqubo yokupholisa
Iidrowa zetshiphu
Telescopic way covers
Amalungu angakhethwa:
Intloko jikelele
Intloko yokusila ye-engile yasekunene
Umkhono wokwandiswa kwe-spindle
Ukupholisa Ngesixhobo Sokupholisa
Isikhululo sokusebenza somsebenzisi
Unogada wetafile womsebenzi weCTS
I-oil skimmer
Ibhloko ye-Angular
Umhambisi wetshiphu
I-air conditioner yekhabhathi yombane
Imodyuli yokhuseleko
Isixhobo sokuphakamisa
