I-MICROCUT HBM-4 iyadika kunye nomatshini wokugaya
Ezona mpawu:
1. Ø110mm quill ububanzi kunye nohambo 550 mm ukuba nzulu-umngxuma boring
2. Rigid spindle ngesantya 3000rpm, kunye ISO#50 taper kwaye ifakelwe 2 amanyathelo okutshintsha isantya kwimveliso yesantya esiphezulu.
Iimpawu eziphambili:
| INTO | IYUNITHI | I-HBM-4 |
| Uhambo olunqamlezayo lwetafile ye-X | mm | 2200 |
| I-Y axis headstock nkqo | mm | 1600 |
| Itafile ye-Z uhambo olude | mm | 1600 |
| Idayamitha yeQuil | mm | 110 |
| W axis (quill) uhambo | mm | 550 |
| Amandla e-spindle | kW | 15 / 18.5 (std) |
| Max. isantya sokusonta | rpm | 35-3000 |
| I-Spindle torque | Nm | 740 / 863 (std) |
| Uluhlu lwezixhobo zokuphotha | Inyathelo eli-2 (1:2 / 1:6) | |
| Ubungakanani betafile | mm | 1250 x 1500 (std) |
| Idigri ye-Rotary table indexing | isidanga | 1° (std) / 0.001° (ukhetho) |
| Isantya sokujikeleza kwetheyibhile | rpm | 5.5 (1°) / 2 (0.001°) |
| Max. umthamo wokulayishwa kwetafile | kg | 5000 |
| Ukutya okuKhawulezayo (X/Y/Z/W) | m/umz | 12/12/12/6 |
| Inombolo yesixhobo se-ATC | 28/60 | |
| Ubunzima bomatshini | kg | 22500 |
Izincedisi eziqhelekileyo:
| I-oyile yokupholisa i-spindle |
| Spindle vibration esweni |
| Inkqubo yokupholisa |
| Inkqubo yokuthambisa ngokuzenzekela |
| ibhokisi yeMPG |
| Umtshintshi wobushushu |
Izincedi ozikhethayo:
| Izikhululo ze-ATC 28/40/60 |
| Intloko yokusila ye-engile yasekunene |
| Intloko yokusila Universal |
| Ujongene nentloko |
| Ibhloko ye-engile yasekunene |
| Umkhono wokwandiswa kwe-spindle |
| Isikali somgca weX/Y/Z izembe (Fagor okanye Heidenhain) |
| Isiguquli samandla |
| Ukupholisa ngesixhobo sokusonta |
| Unogada wetafile weCTS |
| Ukhuseleko lomsebenzisi |
| Into yokufaka umoya endlini |
| isixhobo sokucwangcisa probe |
| Umsebenzi weprobe |
Bhala umyalezo wakho apha kwaye uwuthumele kuthi
